|

FirstNano® Introduces Our New Solid Source Deposition System for the Production of Semiconducting Nanowires

RONKONKOMA, N.Y., July 13 /PRNewswire-FirstCall/ — FirstNano®, a division of CVD Equipment Corporation (Amex:CVV) has announced today the release of it’s ET2000SS and ET3000SS solid source deposition systems specifically designed for producing Semiconducting Nanowires. Single-Crystalline nanowires made from materials such as Zinc Oxide (ZnO) and Gallium Nitride (GaN) have been the focus of researchers for many years because of their remarkable properties as electronic and optoelectronic materials.

GaN is a semi-conducting material used for Blue, Green and UV Light Emitting Diodes (LEDs) and Lasers. Blue LEDs are also treated with phosphors to create the white light LEDs that are currently used in flashlights, signage and other lighting applications.

ZnO is a semi-conducting material used for Blue-LEDs and Lasers, and is thought to be a less expensive alternative to GaN. ZnO is also well known for absorbing UV radiation making it an important ingredient in personal products such as cosmetics and sun blocking lotions.

Researchers have been able to demonstrate that using solid sources such as Gallium and Zinc powders are a less expensive and safer alternative to using the conventional Metal Organic Sources used by the current Metal Organic Vapor Deposition Chemical Vapor Deposition (MOCVD) method for manufacturing LEDs.

To date, GaN and ZnO nanowire LEDs and lasers have been possible only on a research scale. One of the major issues for producing larger samples has been to control the temperature of the solid source (Zn or Ga) and the temperature uniformity of the sample.

The typical process for depositing these materials is called the “Vapor- Solid” (VS)” or “Vapor-Liquid-Solid” (VLS) method of CVD. In the case of ZnO, the source is heated to approximately 900 degrees Celsius to vaporize the source powders and the sample is placed in the chamber where the temperature drops to approximately 800 degrees Celsius. In most systems this leaves a non- uniform area for the substrate, hence a very narrow processes area for the sample to be placed.

Our solid source deposition systems have been specifically designed to accommodate the “Vapor-Solid” (VS)” and “Vapor-Liquid-Solid” (VLS) method of nanowire deposition. This new design provides better temperature control of the source material and substrate temperature uniformity by providing distinct temperature zones and separate closed loop temperature control systems. The improved temperature control along with the increased capacity of the ET2000SS and ET3000SS systems are the first step in bringing these remarkable materials to full production levels. ZnO nanowire photos grown on a 2″ sapphire wafer and on carbon flakes can be seen on the following web address https://www.cvdequipment.com/pr0713.htm.

About CVD Equipment Corporation

CVD Equipment Corporation (Nasdaq: CVV) is a designer and manufacturer of standard and custom state-of-the-art equipment used in the development, design and manufacture of advanced electronic components, materials and coatings for research and industrial applications. We offer a broad range of chemical vapor deposition, gas control, and other equipment that is used by our customers to research, design, and manufacture semiconductors, solar cells, carbon nanotubes, nanowires, LEDs, MEMS, industrial coatings and equipment for surface mounting of components onto printed circuit boards.

The Private Securities Litigation Reform Act of 1995 provides a “safe harbor” for forward-looking statements. Certain information included in this press release (as well as information included in oral statements or other written statements made or to be made by CVD Equipment Corporation) contains statements that are forward-looking. All statements other than statements of historical fact are hereby identified as “forward-looking statements,” as that term is defined in the Private Securities Litigation Reform Act of 1995. Such forward looking information involves a number of known and unknown risks and uncertainties that could cause actual results to differ materially from those discussed or anticipated by management. Potential risks and uncertainties include, among other factors, industry specific and general business conditions, competitive market conditions, success of CVD Equipment Corporation’s growth and sales strategies, the possibility of customer changes in delivery schedules, cancellation of orders, potential delays in product shipments, delays in obtaining inventory parts from suppliers, failure to satisfy customer acceptance requirements and other risk factors described in CVD Equipment Corporation’s SEC filings. All forward-looking statements are based on management’s estimates, projections and assumptions as of the date hereof and CVD Equipment Corporation assumes no obligation to update this press release.